Kitchen Secret #14The difference between an integrated appliance& a hidden kitchen appliance:
As if deciding upon your kitchen style and design doesnt give you a big headache, you will also have to decide on the pros and cons of either keeping your existing appliances, buying new stand alone kitchen appliances or buying integrated ones. Many customers dont take time in analysing which appliance will be right.
Many factors need to be taken into consideration. On this occasion, well be looking at appliances that typically are situated close to a water supply appliances such as washing machines, dryers and dishwashers.Figure 8 shows a typical example of a customer wanting to integrate a non-integrated appliance. In this situation the appliance is a washing machine, but it could
have just as easily have been something else. To hide a non-integrated kitchen appliance in
such a scenario, its necessary to use a slightly deeper worktop. A washing machine needs
some breathing space at the back. In order to have the doors flush with the finish of the worktop at the front and an adequate gap at the rear, the depth of the worktop needs to be extended by at lease 50mm. This means that if encountering a situation where the wall for this particular part of the kitchen only allows for a 600mm depth, then the whole row of cupboards and appliances will have to stick out very slightly. This can again be seen in figure 8.
As most machines are very nearly 600mm wide, when enclosing such an appliance kitchen companies will generally allow for a 700mm space 50mm clear at either side. When attaching the doors, a 300 and 400mm door is used not the most symmetrical look, but more importantly taking up an additional 100mm of space in the kitchen run without good reason.
When space is at a premium, a 100mm waste in the run might just well have a significant impact upon the design.
Figure 9 shows another alternative for the same part of the kitchen. This time, we are using a fully integrated washer.Integrated kitchen appliances are completely different to non-integrated ones.
As a generalisation, one of the main differences is the ventilation supply.
For non-integrated appliances, the cooling ventilation can be found at the rear, whilst with the integrated version it can be found behind a vent in the kitchen plinth.
This significant appliance design alteration allows both cupboards in the kitchen as well as worktop to be positioned right next to it. The alternative in figure 9 enables yet another amendment to the overall kitchen design. As can be seen in figure 8, there is only room for a 400mm base unit to the right hand size of the appliance.
Many kitchen companies dont make drawers in a 400mm width they only have a 500mm option. Therefore, if theres going to be a hidden non-integrated kitchen appliance in this particular run, then there wont be enough room to have a handy set of drawers nearby to the sink. The important thing to remember is that one small seemingly insignificant change in the kitchen design could result in a vast change in the efficiency of the overall final package.
CLICK HERE to download your own FREE 21 Kitchen Design Secrets eBook